EPS is an infinitely lasting material. Despite this, it is seen that it is claimed that EPS disappears over time where it is used. The truth of the matter is as follows: If EPS is applied in the right place, in the right thickness and density, in accordance with building physics and construction rules, there is no such thing as material destruction. On the other hand, if EPS is used at a low density (for example, 10 kg/m3) under pressure in a hot area (for example, on a terrace roof), due to lack of knowledge or due to cheap prices, EPS will soften and be crushed under the influence of heat and pressure, causing the layers above it to collapse. In such places, high density (minimum 14-16 kg/m3) EPS should be used. As a matter of fact, samples taken from places around the world where EPS was applied 30-40 years ago prove that no change has occurred in EPS.
F.A.Q.
-
1. RIBAT PANEL – HOW LONG IS THE LIFETIME OF EPS?
-
2. WHY ARE THE NAMES OF 3D EPS PANEL AND LIGHTWEIGHT PANEL DIFFERENT?3D EPS Panel is the name defined for special panels produced under the Ribat Panel brand in the IdeCAD program. Likewise, Light Panel is the name defined for special panels produced under the Ribat Panel brand in the Sta4CAD program. Although both terms describe the same product, this difference has occurred due to the preferences of the program officials in choosing the name.
-
3. WHAT IS 3D EPS PANEL? WHAT IS LIGHT PANEL?3D EPS Panel – Light Panel is a technical building material consisting of the following elements: 2.5-3 mm diameter stainless galvanized cross steel, 5x5 cm spaced and 2.5 mm diameter stainless galvanized steel outer and inner surfaces, 5-15 cm thick expanded polystyrene ( EPS). 3D EPS Panel - Lightweight Panel is a modern building material developed for the rapid construction of new energy-efficient buildings and the renovation of existing buildings and structures. Houses, walls, floors, roof, stairs, gyms, industrial buildings and farmhouses etc. A wide variety of structures can be created. 3D EPS Panel – Lightweight Panel has the advantages of energy saving, heat insulation, comfort, sound insulation, ease of application, construction speed and construction cost, strength and durability. It is very light and no additional vehicle is needed to carry it. Ribat Panel produces 3D EPS Panel - Lightweight Panel in Turkey. It produces with maximum precision in its production facility with high automation and quality standards. Ribat Panel's expert staff continues to work intensively to take speed, quality, reliability and cost advantage to higher levels in 3D EPS Panel - Light Panel design and construction.
-
4. WHY ARE ROOFING SYSTEMS MADE FROM RIBAT PANEL?The application that minimizes mold labor in the roof shell and final floor decks is the Ribat Panel application. 6 cm of concrete is poured onto the Ribat Panel, thus reducing the load on the building. This becomes an important factor that relieves all load-bearing elements, right down to the foundation of the building. Ribat Panel's own weight is very low at 4.5 kg per square meter. It is quickly assembled without the need for any formwork, and concrete is poured by placing additional reinforcement as needed. After the concrete gains strength, the grid on which the panels are laid is removed and plastering is done from below. Making the desired roof with Ribat Panel is both economical and easy.
-
5. WHY ARE RIBAT PANEL USED IN VALVE ROOF SYSTEM?By using Ribat Panel in vault roof construction, both aesthetic and cost-effective solutions are obtained. The process is completed at much more affordable costs compared to steel roof construction. Additionally, there is no need for thermal insulation. Since it does not have many joints and layers like steel, it is not likely to cause problems over time. If concrete is preferred, it is necessary to bear high mold labor costs for the vault and take into consideration the high weight of the building. It is also necessary to endure a long application period.
-
6. RIBAT PANEL – IS EPS HEALTHY?EPS has no health risks. For this reason, packaging made of EPS material is mostly used even in the food industry. Like most insulation products, it is not a nutrient for microorganisms. It doesn't mould, it doesn't rot, it doesn't smell. EPS is always outside of biological interactions.
-
7. RIBAT PANEL – EPS IS IT FIRE RESISTANT?Properly produced, high-quality EPS products are non-flammable and non-flammable. In case of direct contact with the flame, it only changes shape and does not conduct the flame in any way. It does not release toxic/black gas, which is the most important issue in case of fire, and does not endanger human life. EPS of the highest standards is used in Ribat Panel. In the fire tests performed, Ribat Panel used in walls and floors resisted fire for 90 minutes without showing any deterioration.
-
8. RIBAT PANEL – EPS IS IT HARMFUL TO NATURE?EPS is 100% recyclable. Therefore, it is an extremely beneficial product in terms of sustainability and ecology. EPS is the best insulation material today because it does not cause sweating, is long-lasting, is economical and is healthy. 98% of EPS consists of air bubbles. For this reason, contrary to expectations, it does not have an oil-dominated structure. Paint used in building materials etc. It contains much less chemicals than many products such as.